40
CLEANING AND MAINTENANCE
CLEANING THE BREW GROUP
The Brew Group must be cleaned at least once a week.
Lubricate the Brew Group after approximately 500 brewing cycles. The grease for the lubrication of the Brew
Group may be purchased by Authorized Service Centres.
Wash the brew group with warm water.
WARNING! Do not wash the brew group with detergents that can compromise its correct operation. Do
not wash in the dishwasher.
1
Press to open the service door.
4
Wash the upper fi lter with
running water.
7
The lever on the rear part of
the group must be in contact
with the group base.
2
Press the PUSH button to remove
the brew group.
5
Make sure the group is in rest
position; the two references must
match.
8
Lubricate the Brew Group guides
only with the supplied grease.
3
Wash any coffee residues from
the brew group.
6
Make sure the components are in
the correct position. The hook
shown must be in the correct
position; to check its position,
fi rmly press the "PUSH" button.
9
Apply the grease evenly.
Espresso Italia PTY LTD
www.espressoitalia.com.au
Freecall 1300 660 976