Related Manuals for Saeco Primea Ring
Summary of Contents for Saeco Primea Ring
- Page 1 Operation and maintenance manual Before using the machine, please read the attached operating instructions. Carefully read the safety rules FOR HOUSEHOLD USE ONLY...
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and injury to persons do not immerse cord, plugs, or appliance in water or other liquid. - Page 3 CAUTION This appliance is for household use only. Any servicing, other than cleaning and user maintenance, should be performed by an authorized service centre. Do not immerse machine in water. To reduce the risk of fire or electric shock, do not disassemble the machine.
-
Page 4: Table Of Contents
INDEX WARNING ............................2 APPLIANCE ............................4 ..............................4 ACCESSORIES INSTALLATION ..........................5 .............................5 STARTING THE MACHINE .............................6 SETTING THE LANGUAGE ............................7 INTENZA WATER FILTER DISPLAY ............................8 ...............................8 COFFEE AROMA ADJUSTMENTS ..........................9 ............................9 COFFEE INTENSITIY ........................9 ADJUSTING THE HEIGHT OF THE DRIP TRAY ..........................9 FILLING THE MILK CONTAINER BEVERAGE DISPENSING........................10 ........................10... -
Page 5: Warning
GENERAL INFORMATION The coffee machine is intended for preparing espresso by using either coffee beans or ground coffee. It includes an automatic device for preparing milk beverages and a hot water dispenser. The machine is elegantly designed for domestic use and is not suitable for continuous heavy duty or professional use. -
Page 6: Appliance
APPLIANCE Coffee bean hopper Open coffee bean hopper button Coffee bean hopper cover Cup warming plate Compartment for pre- ground coffee Control panel Main switch Service door Dispensing head Coffee grounds drawer Drip tray + grill and fl oat Compartment for milk container Button for raising/lowering the drip tray... -
Page 7: Installation
INSTALLATION STARTING THE MACHINE Make sure that the main power button is not switched to the “ON” position. Press the button on the coffee Close the cover pushing it down Remove the water tank. hopper to open the cover. Fill the completely. -
Page 8: Setting The Language
In this phase you must decide boiler filling whether to install the water fi lter. Its use is recommended by Saeco. The water fi lter purifi es water and allows you to taste the full aroma of coffee. If you want to install the water Press to prime the circuit;... -
Page 9: Intenza Water Filter
INTENZA WATER FILTER To improve the quality of the water you use, and extend the life of your machine at the same time, it is recommended that you install the water fi lter. After installation, go to the water fi lter initialization program (see programming). -
Page 10: Display
DISPLAY strong aroma Select dispensing of Enter the espresso coffee 08:33 beverages with milk programming menu Click wheel Confi rmation key Select the coffee Hot water brewing bean dose or the selection key quantity of pre- ground coffee • Press the key twice to make 2 cups. -
Page 11: Adjustments
The SBS system has been carefully designed to give your coffee the intense taste you desire. Simply turn the dial and you will notice that the coffee goes from mild intensity to strong intensity. SBS – SAECO BREWING SYSTEM MEDIUM... -
Page 12: Beverage Dispensing
BEVERAGE DISPENSING THE DISPENSING OF COFFEE, HOT WATER AND MILK MAY BE STOPPED AT ANY TIME BY PRESSING THE KEY AGAIN. THE DISPENSED MILK MAY BE VERY HOT: DANGER OF SCALDING. AVOID TOUCHING IT DIRECTLY WITH YOUR HANDS. THE USED MILK HAS TO BE PROPERLY PRESERVED. DO NOT USE IT AFTER THE BEST-BEFORE DATE SHOWN ON THE PACK AGE. -
Page 13: Dispensing Beverages With Ground Coffee
DISPENSING BEVERAGES WITH GROUND COFFEE Pre-ground coffee must be poured into the appropriate compartment positioned next to the coffee bean hopper. Pour in only coffee ground for espresso machines and never coffee beans or instant coffee. (see the “Beverage programming” chapter on page 16). WARNING: PUT PRE-GROUND COFFEE IN THE COMPARTMENT ONLY WHEN YOU WISH TO DISPENSE THIS TYPE OF BEVERAGE. -
Page 14: Latte Macchiato
BEVERAGE DISPENSING LATTE MACCHIATO Fill the milk container SEE INSTRUCTIONS ON PAGE 38 FOR OPTIMAL MILK DISPENSING strong aroma strong aroma strong aroma espresso coffee 08:33 latte macchiato 08:33 latte macchiato 08:33 Select latte macchiato by navigating Select the aroma by pressing the Press the key. -
Page 15: Espresso Coffee
in progress rinsing milk circuit milk circ. rinse cycle In this phase the user cannot Remove the container, rinse Press to perform the rinse intervene and must wait until the and dry. cycle. cycle fi nishes. After this, the machine returns to the main menu. -
Page 16: Espresso Macchiato
BEVERAGE DISPENSING ESPRESSO MACCHIATO Fill the milk container strong aroma strong aroma strong aroma espresso coffee 08:33 espresso macchiato 08:33 espresso macchiato 08:33 Select espresso macchiato by Select the aroma by pressing the Press the key. navigating the click wheel with key one or more times. -
Page 17: Dispensing Hot Milk
brewing in progress add milk? When the “milk circuit rinsing” cappuccino cappuccino symbol fl ashes, rinse the milk circuits as described for the latte macchiato (see page 12, step 6). Press the key once or twice If you wish, press the button. -
Page 18: Beverage Programming
BEVERAGE PROGRAMMING Every beverage can be programmed according to your own tastes. 1. PROGRAMMING FOR SELF-INSTRUCTING For all beverages you can quickly program the quantity of coffee and/or milk dispensed in the cups whenever the key is pressed. Select the type of beverage you want to program, then press and hold the key until the display shows (for example): self-instruction active... - Page 19 strong aroma beverage settings espresso coffee 08:33 Check that the water tank and coffee Press the button. Select “beverage settings”. Press bean hopper are full; place the cup button to confi rm. under the dispensing spout. beverage settings strong aroma coffee:¸¿¸¿...
-
Page 20: Programming The Machine
PROGRAMMING THE MACHINE Some of the machine’s functions can be programmed to customize operations according to your own tastes. strong aroma espresso coffee 08:33 Press the key to: - confi rm the selection; - save the new settings. 1 Press the key. -
Page 21: Machine Settings
MACHINE SETTINGS To set the general machine operating parameters, press the key and select “machine settings”. Turn the click wheel with a fi nger to: machine settings machine settings language acoustic alerts set the language of the menus. set/activate the acoustic alarms. machine settings machine settings water filter... -
Page 22: Cup Warmer Menu
PROGRAMMING THE MACHINE “CUP WARMER” MENU > machine settings > cup warming plate. To turn on/off the operation of the cup warming surface located on the top of the machine. A warm cup allows you to fully savour the coffee and taste its full aroma. machine settings machine settings Select by navigating the click... -
Page 23: Rinse Menu
“RINSE” MENU > machine settings > rinse cycle. To clean the internal tubes in order to guarantee that the beverages are dispensed only with fresh water. This function has been enabled by the manufacturer on all new appliances. machine settings machine settings Select by navigating the click rinse cycle... -
Page 24: Acoustic Alarm Menu
PROGRAMMING THE MACHINE “ACOUSTIC ALARM” MENU > machine settings > acoustic alerts To enable/disable the acoustic alarms of the machine. machine settings machine settings acoustic alerts acoustic alerts key tone Select by navigating the click wheel with your fi nger. You may set: - key tone: to activate/deactivate a tone each time a key is pressed. -
Page 25: Maintenance Menu
“MAINTENANCE” MENU > machine settings > maintenance. To clean all the machine’s internal circuits used for making coffee and milk. Turn the click wheel with your fi nger to: maintenance maintenance milk circ. rinse cycle coffee cleaning cycle rinse the milk circuits after making clean the brew group. -
Page 26: Coffee Wash Cycle
To clean the machine’s internal circuit used for brewing coffee. To wash the Brew Group, simply clean with water as shown on page 40. This wash completes maintenance of the Brew Group. Packages of Saeco detergent tablets may be purchased at your local dealer or by Authorized Service Centres. -
Page 27: Milk Wash Cycle
Milk wash cycle > machine settings > maintenance > milk cleaning cycle To clean the machine’s internal circuits used for preparing milk. This cycle is proposed after 14 days from the fi rst dispensing of a milk-based beverage. After 14 days, the “milk circuit washing”... - Page 28 PROGRAMMING THE MACHINE Open the compartment and Insert the content of the Fill the milk container with fresh remove the milk container. detergent packet into the water up to the «max» level. container. add cleaner into milk cleaning cycle Open the compartment and Position an adequately sized Close the compartment.
- Page 29 fill with water push ok rinsing milk cleaning cycle milk cleaning cycle milk cleaning cycle Rinse the container and fi ll it Insert the container and press Wait… with fresh water. rinse fill with water milk cleaning cycle milk cleaning cycle Remove the milk container.
-
Page 30: Descaling Cycle
WARNING! NEVER USE VINEGAR AS A DESCALER. Saeco descaler is recommended, however you can use a non-toxic and/or non-harmful descaling product for coffee machines, commonly available online or in coffeeshops. The solution used must be disposed of according to the manufacturer’s instructions and/or according to regulations in force in the country of use. - Page 31 To perform descaling before the machine blocks, or before the descaling message appears: machine settings maintenance maintenance descaling cycle descaling cycle When the solution is fi nished Insert the descaler and press the following message appears key to begin. on the display: descaling fill water tank insert tank...
-
Page 32: Clock Settings
PROGRAMMING THE MACHINE CLOCK SETTINGS > machine settings > clock settings To set the current time, date and hour format to display. machine settings clock settings In this menu you can set: - the current time (hour and minutes) - the hour format (24 hours - AM/PM) - the current date (day –... -
Page 33: Date Setting
Date setting > machine settings > clock settings > date setting To set the date (day, month, year, day of the week). Same procedure for all parameters. machine settings clock settings date setting clock settings date setting Select the parameter you want to set, for example “day”. -
Page 34: Standby Setting Energy Saving
PROGRAMMING THE MACHINE STANDBY SETTING > machine settings > stand-by setting machine settings stand-by setting In this menu you can: stand-by setting stand-by setting energy saving timer setting set the energy saving mode (time that set the timers (activation of on/off times must elapse from the last beverage –... - Page 35 2. Setting an interval for turning on the machine You can set an on/off time for each day of the week (in this case, the procedure for setting an interval for Monday is displayed). stand-by setting timer setting monday timer setting monday switch on 08h (am)
-
Page 36: Special Functions
PROGRAMMING THE MACHINE SPECIAL FUNCTIONS This menu allows you to access special functions present on the machine. key and select “special functions”. Turn the click wheel with a To access, press the fi nger to: special functions special functions cancel settings coffee of the world restore the factory settings. -
Page 37: Coffee In The World
COFFEE IN THE WORLD > special funtions > coffee of the world This function enables the user to: coffee of the world coffee of the world coffee of the world ristretto espresso italiano café prepare true ristretto all’italiana prepare a typical Italian espresso prepare a typical North European coffee coffee of the world... -
Page 38: Beverage Counters
PROGRAMMING THE MACHINE BEVERAGE COUNTERS > special funtions > product counters This function shows how many beverages have been prepared for every single type of beverage. special functions special function product counters espresso coffee You may display the data of every single type of beverage by navigating the click wheel with your fi... -
Page 39: Cleaning And Maintenance
CLEANING AND MAINTENANCE MAINTENANCE DURING OPERATION During normal operation, the “empty grounds drawer” message may appear. This operation must be performed when the machine is on. If you remove grounds with the machine off or when not signaled on the display, the count of the grounds emptied into the drawer is not reset. -
Page 40: Milk Container Maintenance And Cleaning
CLEANING AND MAINTENANCE MILK CONTAINER MAINTENANCE AND CLEANING The milk container and the cappuccinatore have been designed to optimize the milk froth. Thorough cleaning and maintenance of the milk container and cappuccinatore will allow you to savour excellent milk-based beverages. It is recommended to rinse the cappuccinatore before the fi... - Page 41 THOROUGH MAINTENANCE OF THE CAPPUCCINATORE Thoroughly wash the cappuccinatore at least once a week. The components should be hand-washed with household detergents. Remove the cappuccinatore. Separate the upper part of the Remove the regulator. cappuccinatore from the lower part. Remove the cap from the lower Wash all components.
-
Page 42: Cleaning The Brew Group
CLEANING AND MAINTENANCE CLEANING THE BREW GROUP The Brew Group must be cleaned at least once a week. Lubricate the Brew Group after approximately 500 brewing cycles. The grease for the lubrication of the Brew Group may be purchased by Authorized Service Centres. Wash the brew group with warm water. -
Page 43: Grinder Maintenance
Apply the grease evenly. Reassemble it by pressing the Close the service door and insert PUSH! button. the coffee grounds drawer. GRINDER MAINTENANCE The grinder can be adjusted in order to create a fi ner grind after many grinder cycles (approximately 2000). WARNING! This operation should be carried out carefully and by an experienced user. -
Page 44: Error Codes
ERROR CODES GUIDE MESSAGE THAT APPEARS HOW TO REMOVE THE MESSAGE restart to solving the problem Turn off and after 30 minutes turn the machine on again to restore normal operation. call assistance Problem that requires the intervention of the customer service centre. -
Page 45: Safety Rules
SAFETY RULES IN CASE OF EMERGENCY Immediately unplug the cord from the outlet. ONLY USE THE APPLIANCE • Indoors. • For preparing coffee, hot water and for foaming milk. • For domestic use. • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. -
Page 46: Replacement Parts
SAFETY RULES DANGERS • Children should be supervised to ensure that they do not play with the appliance. • The appliance is dangerous to children. When left unattended, unplug from the electrical outlet. • Keep the coffee machine packaging out of the reach of children. •... -
Page 47: Technical Data
TECHNICAL DATA ADDITIONAL INFORMATION FOR THE CORRECT USE OF THE INTENZA WATER FILTER To correctly use the Intenza water fi lter, please consider the following instructions: 1. Store the water fi lter in a cool area in which the room temperature is between +1°C - +50°C (34°F to 122°F). Do not store it in direct sunlight. - Page 48 EC DECLARATION OF CONFORMITY EC 2006/95, EC 2004/118, EC 1992/31, EC 1993/68 SAECO INTERNATIONAL GROUP S.P.A - Via Torretta, 240 - 40041 Gaggio Montano (Bo) - Italy declare under our responsability that the product: AUTOMATIC COFFEE MAKER SUP 030 ND to which this declaration relates is in conformity with the following standards or other normative documents : •...
- Page 49 International Group S.p.A. Via Torretta, 240 I-40041 Gaggio Montano, Bologna Tel: + 39 0534 771111 Fax: + 39 0534 31025 www.saeco.com The manufacturer reserves the right to change the features of the product without prior notice. © Saeco International Group S.p.A.