Aqua Prima" Filter - Saeco PRIMEA RING CAPPUCINO Operation And Maintenance Manual

"AQUA PRIMA" FILTER

To improve the quality of the water used, install the "Aqua Prima" fi lter. After installation, go to the
fi lter initialisation program (see programming). In this mode, the machine advises the user when the
fi lter must be replaced.
1
Remove the "Aqua Prima" fi lter
from its packaging. Enter the date
of the current month.
4
Place a container under the
spout.
7
in progress
initialisation
The machine initialises the fi lter.
Then, press repeatedly. When the "exit" message is displayed, press
ends the start-up phase. Wait until at the end of the procedure, the display shows what is shown on page 8.
Important warning for using the "Aqua Prima Filter" can be found at page 45.
2
Insert the fi lter in its place within
the empty tank (see fi gure);
Press down until it clicks into
place.
5
water filter inserted
yes
Press .
8
done
initialisation
Press again.
3
Fill the tank with fresh water. Let
the fi lter soak for 30 minutes.
After 30 minutes discard the
water in the tank and refi ll with
fresh water.
6
push ok
initialisation
Press again.
. In this way, the machine
Espresso Italia PTY LTD
www.espressoitalia.com.au
Freecall 1300 660 976
7