Rinse Menu; Water Hardness Menu - Saeco PRIMEA RING CAPPUCINO Operation And Maintenance Manual

20 PROGRAMMING THE MACHINE
"RINSE" MENU
> machine settings > rinse cycle.
To clean the internal tubes in order to guarantee that the beverages are dispensed only with fresh water. This
function has been enabled by the manufacturer on all new appliances.
1
machine settings
1.
2.
Note: This rinse cycle is performed every time the machine is turned on after the warming phase.
"WATER HARDNESS" MENU
> machine settings > water hardness.
To adjust the level of water hardness, expressed on a scale of 1 to 4. The appliance is preset at a hardness
value of 3.
1
Immerse the water hardness tester
(included in the accessories) for one
second in water.
3
machine settings
1.
2.
2
machine settings
rinse cycle
1.
2.
2
1 2
Check the value.
4
machine settings
water hardness
1.
2.
3
Select by navigating the click
wheel with your fi nger.
It is possible to set:
- yes
- no
Press the button to save.
3 4
The test can be used only for
one measurement.
5
- 3 +
water hardness
1.
2.
Set and store the water hardness
according to the value on the tester.
Espresso Italia PTY LTD
www.espressoitalia.com.au
Freecall 1300 660 976