Saeco PRIMEA RING CAPPUCINO Operation And Maintenance Manual page 18

16 BEVERAGE PROGRAMMING
1
Check that the water tank and coffee
bean hopper are full; place the cup
under the dispensing spout.
4
beverage settings
latte macchiato
1.
2.
Select the beverage to be
programmed. Press the
button to confi rm.
7
milk :¸¿¸¿
latte macchiato
1.
2.
Change the milk dose by
navigating the click wheel with
your fi nger; confi rm with
10
prebrewing: normal
latte macchiato
Press the button to select the
parameter prebrewing.
2
strong aroma
espresso coffee
Press the button.
5
strong aroma
latte macchiato
1.
Press the button one or more
times to adjust the aroma or select
the use of pre-ground coffee. Press
the button to save.
8
temperature: high
latte macchiato
Press the button for more than
two seconds to access the other
.
parameters to be programmed.
11
prebrewing: normal
latte macchiato
1.
Change the prebrew value (normal, strong, off) by navigating the
click wheel with your fi nger. Press the
the button to exit.
3
beverage settings
08:33
Select "beverage settings". Press
the
6
coffee:¸¿¸¿
latte macchiato
2.
Change the coffee dose (amount of
water to be used) by navigating the
click wheel with your fi nger;
confi rm with
change the parameter from coffee
to milk.
9
temperature: high
latte macchiato
Change the temperature value
(high, medium, low) by navigating
the click wheel with your fi nger.
Press the
Prebrewing: the coffee is
slightly dampened before
brewing to bring out the full
aroma of the coffee which
2.
acquires an excellent taste.
button to save. Press
Espresso Italia PTY LTD
www.espressoitalia.com.au
Freecall 1300 660 976
button to confi rm.
1.
3.
2.
. Press to
1.
2.
button to save.