Table of Contents
Advertisement
MAINTENANCE
AND TROUBLESHOOTING
Inspect and tighten all parts of the elliptical exerciser
regularly. Replace any worn parts immediately.
To clean the elliptical exerciser, use a damp cloth and
a small amount of mild soap. important:
To avoid
damage to the console,
keep liquids
away from
the consote
and keep the console
out of direct
sunlight.
BATTERY REPLACEMENT
If the console displays become dim, the batteries
should be replaced; most console problems are the
result of low batteries. See assembly step 4 on page
6 for replacement
instructions.
HOW TO LEVEL THE ELMPTtCAL
EXERCISER
After the elliptical
exerciser has
been moved to
the location
where it will be
used, make sure
that the ends of
both stabilizers
are touching the
floor, if the ellipti-
cal exerciser
Leveling Foot
"x,
rocks slightly during use, turn one or both of the level-
ing feet under the front stabilizer until the rocking
motion is eliminated.
HANBGRIP PULSE SENSOR TROUBLESHOOTING
. Avoid moving your hands while using the handgdp
pulse sensor. Excessive movement may interfere
with heart rate readings.
. Do not hold the metal contacts too tightly; doing so
may interfere with heart rate readings.
• For the most accurate heart rate reading, hold the
metal contacts for about 30 seconds.
For optimal performance of the handgdp pulse sen-
sor, keep the metal contacts clean. The contacts
can be cleaned with a soft cloth--never
use alcohol,
abrasives, or chemicals.
19
Hide quick links:
Advertisement
Table of Contents
