Polaris 9300 Sport Owner's Manual page 17

Symptom
The remote control does not
work.
9300xi Sport Only
Cause
The batteries are dead and need to
be replaced.
The remote control is not
synchronized to the control unit.
Solution
Replace the batteries in the remote control.
Synchronizing procedure:
When replacing the control unit or the remote con-
trol, it is necessary to synchronise the new remote
control with the control unit:
1. Connect the 9300xi sport to the control unit,
then plug the control unit to the receptacle.
2. Press OFF + Cycle I buttons for more
than 6 seconds until both lights
fl ash once:
3. Press and hold the "rotate right" button on the
remote control unit.
4. The light on the right will fl ash
5 times
lights will fl ash together.
5. The synchronization procedure is completed
when both lights switch off.
Page 17
then both