Install Squat Pulley Frame - Bowflex Xtreme 2 SE Assembly Manual

step 4 Install Squat Pulley Frame
parts:
• Left Squat Pulley Frame (5)
• Right Squat Pulley Frame (6)
• Main Assembly
• 2 Slider Pulleys w/o Decal (8)
• Squat Platform (7)
Hardware:
• 1 Button Head Screw 3/8" X 5" (H)
• 5 Nylock Nut 3/8" (O)
• 2 Button Head Screws 3/8" X 3/4" (I)
• 12 Washers 3/8" (B)
• 4 Button Head Screws 3/8" X 2 3/4" (Q)
Tools:
7/32" Hex Wrench, Adjustable
or Socket Wrench
4-1
Place one Squat Pulley Frame on each side
of the Seat Support Rail as shown, and align
the top screw holes. Secure using a 3/8" X
5" screw, washer and nut in the top hole as
shown .
4-2
Install screws and washers through the
bottom holes of each Squat Pulley Frame into
the Support Rail as shown .
4-3
Put the Squat Platform in position under the
front foot of the Base Frame Assembly . Align
the screw holes in the Squat Platform brackets
with the screw holes on the inner side of each
Squat Pulley Frame.
4-4
Slide one Slider Pulley onto the free end of the
Left Squat Pulley Frame as shown.
Note: Be sure the Slider Pulley knob points
away from the Squat Platform.
Lock the pulley in position near the Seat
Support Rail .
4-5
Install the hardware to attach the Squat
Platform to the Left Squat Pulley Frame.
4-6
Repeat Steps 4-3 through 4-5 for the Right
Squat Pulley Frame.
Assembly Guide
8
5
I
7
O
B
B
6
Q B
8
Bowflex Xtreme
B
H
B O
7
2 SE Assembly Manual
®