Cable End Stop Ball With Core; Rod Cables - Bowflex Xtreme 2 SE Assembly Manual

step 18b Cable and Pulley Routing –
Connect Cable End Stop Ball with Core
step 18c Cable and Pulley Routing –
Connect Rod Cables through Left (3) Floating
and Lat Tower Pulleys
18-4
Repeat with Left Rod Cable and (3) and (8)
Floating Pulleys, as shown in Figure 18c .
note:
Once the Cable End Stop Balls are attached,
hook each Rod Hook onto the Lat Pulley
Housing as shown in Figure 18d .
Figure 18d - Rod Hooks Storage on Lat Pulley
18
Bowflex Xtreme 2 SE Assembly Manual
®
Assembly Guide
Housing
Figure 18b - Detail
Figure 18c
5
4
2
3