Advanced Tab; Diameter Settings Tab - MicroBoards Technology CX-1 User Manual

Advanced Tab

The Advanced Tab allows you to Enable Maximum dpi setting and adjust the amount of ink placed
on the disc using the Ink Volume and Dry Time settings.
Enabling the maximum dpi will result in longer times to process your print image, reducing
throughput.
To change the Ink Volume or Dry Time settings, click the drop-down box and select Change. A
window will open with a setting bar for the option selected.
Changing the Ink Volume will affect how quickly you need to replace your ink cartridges, but also
affects the quality of the printed output.
Changing the Dry Time can increase or decrease your throughput, but if the Dry Time is set too low,
you risk the possibility that the last disc printed will not have dried before the next disc is placed on
top of it in the output bin.
The default settings are the recommended settings and should be used unless absolutely necessary.
If you choose to increase the Ink Volume, you should also increase the Dry Time.

Diameter Settings Tab

The Diameter Settings tab allows you
to change the size of the print image to
accommodate the variety of printable
surface area available on media.
The Outer and Inner Diameters will
change the size of the area to be
printed. To avoid excessive ink
buildup, these values should never be
set so that the CX-1 Disc Publisher is
printing off the media.
The Parameter Unit should remain on
the 0.1mm
precision.
You can also select one of the preset Mask Types to change the diameter settings.
14
setting for maximum