Additional Call Features
Additional Call Features
Auto Dial Transfer Feature
Auto Dial Transfer allows you to use your Auto Dial Key to transmit digits to the
central office after a Trunk Switchhook Flash. You must be on a central
office/exchange (CO) trunk call from or to a CO which offers Centrex or
exchange line-type features.
To use Auto Dial Transfer when you
pick up an incoming trunk call:
CentrexSHF
AutoDial
/
Goodbye
Use the buzz signal
Buzz allows one person, whose telephone is linked to another telephone, to signal
the other telephone. The person signaled hears a buzz. Use this feature to notify
the other person of a call, a visitor, or a request.
To buzz the telephone linked to
yours:
Buzz
52
1. Press the
Centrex Switchhook Flash
Key and wait for interrupted dial tone.
2. Press the
Auto Dial
number desired.
3. Press the
Goodbye
Note: On the Meridian SL-100, Auto Dial
can be used to transfer calls however, you
do not have to be on a central office trunk
call, and the Centrex Switchhook Flash key
is not applicable to the Meridian SL-100.
Press the
Buzz
The telephone linked to yours, buzzes
as long as you hold down the key.
Note: Buzz signal is not available on the
Meridian SL-100.
Key to call the
Key to end the call.
Key.