Table of Contents
Advertisement
Remote Maintenance
The P-870HN-5xb also has the ability to send the system log outside the CPE. Let's
say that we want the system log to be sent to the notebook with IP = 192.168.1.101.
a. Activate the Maintenance Log.
1.
Go to Maintenance > Logs > Log Settings.
2.
Check the Active box.
3.
Select the Log Level, e.g. "Low"
4.
Select the Mode, e.g. "Remote"
5.
Enter the Syslog Server IP Address, e.g. "192.168.1.101"
6.
Enter the Syslog Server UDP Port, e.g. "514"
7.
Click Apply.
All contents copyright (c) 2009 ZyXEL Communications Corporation.
P-870HN-5xb Support Notes
Advertisement
Table of Contents
