Qos Configuration - ZyXEL Communications P-870HN-5xb Support Notes

QoS configuration

a. Enable QoS
1. Make sure that QoS is enabled in Network > WAN > Layer2 Interface
2. Go to Advanced > QoS > General
3. Check the Active QoS box.
4. Go to Advanced > QoS > Queue Setup.
5. Click Add.
6. Check the Active box
7. Input the Name, e.g. "Queue1"
All contents copyright (c) 2009 ZyXEL Communications Corporation.
P-870HN-5xb Support Notes