Table of Contents
Advertisement
Maintenance Log
Internal Maintenance
The P-870HN-5xb has the ability to record the events happening in the CPE into a
system log (according to the severity) and maintain this log in itself.
a. Activate the Maintenance Log.
1.
Go to Maintenance > Logs > Log Settings.
2.
Check the Active box.
3.
Select the Log Level as "Low"
4.
Select the Mode as "Local"
5.
Click Apply.
All contents copyright (c) 2009 ZyXEL Communications Corporation.
P-870HN-5xb Support Notes
Advertisement
Table of Contents
