ZyXEL Communications P-870HN-5xb Support Notes page 77

services and responds to the requests from the authenticator. The station must be
running the 802.1x-compliant client software, such as that offered in the Microsoft
Windows XP operating system, Meeting House AEGIS 802.1x client and Odyssey
802.1x client.
3. Authentication Server:
The device (i.e. RADIUS server) provides an authentication service to an
authenticator. This service determines, from the credentials provided by the
supplicant, whether the supplicant is authorized to access the services provided by
the authenticator. The authentication server performs the actual authentication of
client. It validates the identity of the supplicant. Because the authenticator acts as
the proxy, the authentication service is transparent to the supplicant.
Some Wireless AP (i.e. ZyXEL Wireless AP) have built-in authentication server,
therefore the external RADIUS authentication server is not needed. In this case, the
Wireless AP is acted as both authenticator and authentication server.

Authentication Port State and Authentication Control
The port state determines whether or not the supplicant (Wireless Client) is
granted access to the network behind Wireless AP. There are two authentication
port state on the AP, authorized state and unauthorized state.
By default, the port starts in the unauthorized state. While in this state, the port
disallows all the incoming and outgoing data traffic, except for 802.1x packets. When
a supplicant is successfully authenticated, the port transits to the authorized state,
allowing all the traffic for client to flow normally. If a client that does not support the
802.1x is connected to an unauthorized 802.1x port, the authenticator requests the
client's identity. In this situation, the client does not respond to the 802.1x request;
the port remains in the unauthorized state and the client is not granted access to the
network.
All contents copyright (c) 2009 ZyXEL Communications Corporation.
P-870HN-5xb Support Notes