Remote Maintenance
The P-873HNUP-51B also has the ability to send the system log outside the CPE. Let's
say that we want the system log to be sent to the notebook with IP = 192.168.1.101.
a. Activate the Maintenance Log.
1.
Go to Maintenance > Log Settings.
2.
Check the Active box.
3.
Select the Mode, e.g. "Remote"
4.
Enter the Syslog Server IP Address to be "192.168.1.101".
5.
Click Apply.
We can see the system logs being sent from the CPE by opening Ethereal in the
notebook.
All contents copyright (c) 2011 ZyXEL Communications Corporation.
P-873HNUP-51B Support Notes