Device Management - Xerox CopyCentre 265 Quick Manual

PRINT PROTOCOLS AND NETWORKS (Continued)
Print Submission Tools

DEVICE MANAGEMENT

Management Support
Xerox CentreWare Internet
Services
Xerox CentreWare Web
Novell NDPS/NEPS
(gateway for WorkCentre Pro)
Xerox CentreWare for
Unicenter TNG
Xerox CentreWare for
Tivoli NetView
Xerox CentreWare for HP
OpenView
Xerox Barcode Pro PS
(optional)
Purchase via www.font.net
Environment
Solaris 2.8, 2.9, 2.10; HPUX 11.0,
IBM AIX 4.3.3;
Linux Fedora Core 1 (Intel);
Linux YellowDog 3.0
TIFF/PDF: Supported in
Windows 98/Me/NT 4.0/2000/XP,
Windows Server 2003
SNMP Version 1. SNMP Version 2c and SNMP Version 3
MIB access (IETF-MIBII RFC 1213), host resources
MIB RFC 2790, Printer MIB RFC v.2
Allows simple remote installation setting of configuration options and management of the device
A Web-based server application for network administrators that permits Web browser-based device management from any
workstation, whether running Windows, UNIX or any other operating system.
Works with any SNMP-managed printer from any manufacturer.
Provides help with device discovery and installation, health checks and troubleshooting, and device upgrades, as well as basic
accounting and asset management.
Requires Windows XP or 2000 (Professional or Advanced Server) Windows 2003 and Internet Explorer 6.0 and higher
Server gateway application: centralised management tool
Provides added identification to the general discovery performed by Unicenter TNG and the ability to see the
WorkCentre Pro under a Unicenter TNG Business Process View
Provides for the identification of Xerox N-Series printers and WorkCentre Pro multifunction systems in the general discovery
performed by Tivoli NetView
Provides for the identification of Xerox N-Series printers and WorkCentre Pro multifunction systems in the general discovery
performed by HP Openview
Provides traps and message updates to the Open View alarm browser and the ability to launch CentreWare Internet Services for
device management directly from OpenView
Enables intelligent PostScript printing on Xerox multifunction systems by storing Xerox software, as well as, the barcode fonts on
the printer hard disk. Enables the printing of barcodes from any application (SAP R/3 client or mainframe) that supports PostScript
printing. Automatically calculates the check digit, places start/stop and middle bar characters in the data string, compresses and
encodes the data string, and rotates the barcode through 90 or 270 degrees.
CopyCentre
WorkCentre/WorkCentre Pro Print Specifications
PCL
Submission Tool only
Submission Tool for any
TIFF or PDF file
® WorkCentre
265/275 265/275
PostScript 3
Submission Tool with full feature set
(includes administration, GUI/TTY print
driver and software installation)
N/A
® WorkCentre ® Pro
265/275
Continued
9