Xerox CopyCentre 265 Quick Manual page 19

ELECTRICAL REQUIREMENTS
POWER CONSUMPTION 1
Running
Standby
Low Power Mode
Auto Off / Sleep mode
Warm-up Ready to Copy
Warm-up Ready to Print
Low Power Recovery
ENVIRONMENTAL CONSIDERATIONS
Required Temperature Range
Required Relative Humidity
DIMENSIONS AND WEIGHTS (CopyCentre)
Configuration With (OCT) Offset Catch Tray
(265 only)
With Office Finisher
With Advanced Office Finisher
With Professional Finisher
DIMENSIONS AND WEIGHTS
Configuration With Offset Catch Tray (265 only)
With Office Finisher
With Advanced Office Finisher
With Professional Finisher
CopyCentre/WorkCentre/WorkCentre Pro Machine Specifications
220-240 Volt Nominal, 50 Hz, 10A
Note: Convenience Stapler requires separate 220V 1.2A circuit
10° to 32° C
10% to 85%
(WorkCentre /
WorkCentre Pro)
CopyCentre
CopyCentre
≤ 1690
1 watts
≤ 280 watts
≤ 130 watts
≤ 5 watts
≤ 28 seconds
NA
≤ 20 seconds
Width Depth
1,012 mm 710 mm
1,271 mm 710 mm
1,412 mm 710 mm
1,477 mm 710 mm
Width Depth
1,297 mm 875 mm
1,556 mm 875 mm
1,697 mm 875 mm
1,762 mm 875 mm
1 With Office Finisher. 2 Weights do not include Rear Wall (1.72 kg) or Shelf (1.36 kg).
® WorkCentre
265/275 265/275
WorkCentre / WorkCentre Pro
≤ 1740
≤ 310 watts
≤ 160 watt
≤ 9 watts
≤ 28 seconds
≤ 130 seconds
≤ 20 seconds
Height 3
1,460 mm
1,460 mm
1,460 mm
1,460 mm
Height 3
1,460 mm
1,460 mm
1,460 mm
1,460 mm
® WorkCentre ® Pro
265/275
1 watts
Weight 2
125 kg
153 kg
201 kg
201 kg
Weight 2
134 kg
162 kg
210 kg
210 kg
3 Height with DADH raised.
19