Canon imagePROGRAF iPF6400S User Manual page 84

Borderless Printing at Actual Size (Windows)
6
Select the print target in the
•
Important
7
Click the Page Setup tab to display the Page Setup
sheet.
8
A
In the Page Size list, click the size of the original as specified in the source application. In this case, click
10"x12".
9
Select and click a roll paper in the
10
B
Select the
the Information dialog box.
84
11
Select the width of the loaded roll in the Roll Paper Width list—in this case, click 10-in. Roll (254.0mm).
12
Click OK to close the Information dialog box.
E
Print Target list.
When you are using paper that takes longer for ink to adhere for borderless printing and the Cutter Unit touches
printing surfaces that are not dry yet, it may damage the paper or the edge of the document that is cut, depending
on frequency of use. In this kind of situation, change the ink drying time using the following procedure.
• Click Advanced Settings in Media Type.
• Select an ink drying time in the list for the Between Pages setting of Drying Time.
L
Paper Source list.
Borderless Printing check box to display
iPF6400S
User's Guide