Canon imagePROGRAF iPF6400S User Manual page 794

Color Calibration Using the Printer Sensor
Executing Color Calibration from the Control Panel on the Printer
Execute color calibration from the Control Panel on the printer as follows.
Refer to the information on Color Calibration Management Console operations when executing color calibration from
the computer.
(See "Executing Color Calibration (Windows).")
(See "Executing Color Calibration (Mac OS).")
• Preparing the Printer
1
You can confirm whether the paper to be loaded can be used in color calibration.
(See "Displaying the Paper Reference Guide.")
2
Load the paper.
(See "Loading Rolls on the Roll Holder.")
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Feed Slot.")
• Executing Color Calibration from the Control Panel on the Printer
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect (Settings/Adj. tab).
•
Note
2
Press the OK button.
Set./Adj. Menu is displayed.
3
Press ▲ or ▼ to select Adjust Printer, and then press the OK button.
4
Press ▲ or ▼ to select Calibration, and then press the OK button.
5
Press ▲ or ▼ to select Auto Adjust, and then press the OK button.
After the environment measurements and paper are confirmed, and color calibration is executed, the calibra-
tion adjustment value is set automatically.
Applying Calibration Adjustment Values During Printing
The application of the calibration adjustment values when printing can be set in the printer driver or on the menu of the
Control Panel.
However, when the setting value of the printer driver and the setting value of the Control Panel differ, the setting of the
printer driver is prioritized.
How to Apply
Configure on the printer driver menu. (Windows)
Configure on the printer driver menu. (Mac OS)
794
Configure on the menu of the Control Panel.
P.509
➔
If the Tab Selection screen is not displayed, press the Menu button.
Configure Calibration Value.
(See "Paper Detailed Settings Dialog Box (Windows).")
Configure Calibration Value.
(See "Paper Detailed Settings Dialog Box (Mac OS).")
From Set./Adj. Menu, select Adjust Printer > Calibration > Use Adj. Value.
(See "Menu Settings.")
P.827
➔
P.863
➔
P.500
➔
P.507
➔
P.533
➔
How to Operate
P.634
➔
iPF6400S
P.173
➔
P.354
➔
User's Guide