Paper Detailed Settings Dialog Box - Canon imagePROGRAF iPF6300S User Manual

Mac OS X Software

Paper Detailed Settings Dialog Box

In the Paper Detailed Settings dialog box, you can set Drying Time for the paper selected with Media Type of the Main
panel, etc.
You can display this dialog box by clicking Set of Media Type on the Main panel. (Refer to " Main Pane
You also can select from the control panel of the printer the items for which you can select Printer Default in this dialog
box. (Refer to " Menu Settings
4
A
Media Type
The paper selected with Media Type of the Main panel is displayed.
For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See " Paper Reference
Guide ".)
B
Drying Time
Specify the time that the printer waits for ink to dry, as needed. The Drying Time setting is only valid for rolls.
C
•
Between Pages
You can set the time to wait after printing 1 document page until ejecting the paper. Since waiting time is required for
500
ink to dry before a roll is cut, you can deliver paper in the Output Stacker with the ink dried even if Cutting Mode is
set to Automatic.
Printer Default
None
30 sec. / 1 min. / 3 min. / 5 min. /
10 min. / 30 min. / 60 min.
Paper Detailed Settings Dialog Box
> Printer Driver >
".)
→P.914
Setting Item
The setting of the control panel of the printer is applied.
Paper is ejected immediately after printing completes.
Paper is ejected when the set time elapses after printing completes.
→P.494
Details
".)
iPF6300S