Paper Detailed Settings Dialog Box - Canon imagePROGRAF iPF6300S User Manual

Windows Software

Paper Detailed Settings Dialog Box

In the Paper Detailed Settings dialog box, you can set Drying Time for the paper selected with Media Type of the Main
sheet, etc.
You can display this dialog box by clicking Settings of Media Type on the Main sheet. (Refer to " Main Sheet
".)
→P.215
As for the items for which you can selectPrinter Default in this dialog box, you also can set them from the control panel of
the printer. (Refer to " Menu Settings
3
A
Drying Time
Specify the time that the printer waits for ink to dry, as needed. The Drying Time setting is only valid for rolls.
B
•
Between Pages
You can set the time to wait after printing 1 document page until ejecting the paper. Since waiting time is required for
ink to dry before a roll is cut, you can deliver paper in the Output Stacker with the ink dried even if Cutting Mode is
set to Automatic.
Printer Default
Off
30 sec. / 1 min. / 3 min. / 5 min. /
10 min. / 30 min. / 60 min.
• C
Between Scans
You can set the time to wait after printing 1 line on a page until printing the next line. Set this to avoid bleeding or
220
color unevenness such as when bleeding occurs on a page or when color unevenness occurs during borderless printing.
Printer Default
Off
1 sec. / 3 sec. / 5 sec. / 7 sec. / 9
sec.
Paper Detailed Settings Dialog Box
> Printer Driver >
→P.914
Setting Item
The setting of the control panel of the printer is applied.
Paper is ejected immediately after printing completes.
Paper is ejected when the set time elapses after printing completes.
Setting Item
The setting of the control panel of the printer is applied.
The next line is printed immediately after a line is printed.
The next line is printed when the set time elapses after a line is printed.
* Increase the time according to the occurrence condition of bleeding or unevenness.
".)
Details
Details
iPF6300S