Jenn-Air JMW2430 Use & Care Manual page 9

To set Sabbath Mode
Sabbath Mode must be enabled before starting the Bake cycle.
See the "To enable Sabbath Mode" section.
1. Select Next by pressing the quickset pad next to it.
2. Select Oven Temperature. Use the number keypad to enter a
desired cooking temperature. The temperature must be
between 170ºF (77ºC) and 550ºF (288ºC) or an invalid key
alert occurs and the default temperature appears on the
screen.
3. Select Cook Time by using the number keypad. The time
length may not exceed 12:00:00. In Sabbath Mode, setting
the timer is optional. When the timer ends, the oven cavity will
stop heating.
4. Select Next by pressing the quickset pad next to it.
5. To set a Delayed Start, press the quickset pad next to Delay
Start. See the "Delay Start" section for additional information.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
6. Press START to begin heating.
7. Press CANCEL OVEN (Cancel Upper or Cancel Lower, on
double models) to turn off the oven.
Temperature Change:
The oven temperature can be changed when the oven is in
Sabbath Mode. No tones will sound, and the display will not
change. While the oven is running, pressing a number keypad
and the Start button will change the temperature after a random
delay of between 25 and 40 seconds.
Number keys 1 through 0 represent temperatures. Use the
following chart as a guide.
Number Keypad Oven Temperature
1 170°F (77°C)
2 200°F (93°C)
3 225°F (121°C)
4 250°F (135°C)
5 300°F (149°C)
6 325°F (163°C)
7 350°F (177°C)
8 375°F (191°C)
9 400°F (204°C)
0 450°F (232°C)
To Change Temperature:
1. Touch the number keypad for the desired temperature from
the chart.
2. Touch START.
Oven Calibration
1. From the Setup menu, touch the MORE button until Oven
Calibration appears.
2. Touch the quickset pad next to Oven Calibration.
3. On double models, touch UPPER OVEN or LOWER OVEN to
choose the oven cavity to be checked or calibrated.
4. Adjust the calibration of the oven by choosing the
temperature offset: -1° (if oven is too hot) or +1° (if oven is too
cool); or press the quickset pad next to Use Calibration Tool.
5. When using the -1º/+1º temperature offset, select Save after
entering the desired value.
6. When using the Use Calibration Tool function, place an oven
thermometer in the middle of the oven. After pressing Start,
the oven will heat to a standard temperature.
7. Press START.
8. Wait while the oven heats. This process may take several
minutes.
9. When the message "oven is ready" appears, open the oven
door and read the temperature on the oven thermometer.
10. Select NEXT.
11. Enter the exact value on the thermometer. Use the increase
(+1°) or decrease (-1°) buttons to reflect the thermometer
temperature.
12. Select NEXT.
13. The temperature offset will be calculated when the oven is off
and cooling down.
14. Select SAVE.
Restore Factory Settings
1. From the Setup Menu, touch the MORE button until Restore
Factory Defaults appears.
2. Touch the quickset pad next to Restore Factory Defaults.
3. The following settings will be lost: Language, Temperature
Units, Clock Settings, Date and Screen Appearance. The
Welcome Guide will appear to help you reset these settings.
See the "Welcome Guide" section for additional information.
Kitchen Timer
This is an independent timer not associated with the cook timers.
1. Press the Kitchen Timer button anytime needed.
2. Enter the desired time (00:00:00) using the number keypad.
3. Press the quickset pad next to Cancel Timer to cancel the
function or press Start.
4. While the Kitchen Timer is running, the timer is minimized to
the bar at the bottom of the screen.
5. To adjust the Kitchen Timer, press the Kitchen Timer button
and choose between Cancel Timer, Hide, or Reset by
pressing the quickset pads next to them.
6. If Cancel Timer is pressed, the timer is canceled and the
panel is hidden.
7. If Hide is pressed, the panel is lowered to the appropriate
position. Pressing the Kitchen Timer button will also hide the
panel.
8. If Reset is pressed, the Kitchen Timer is kept open but resets
to (00:00:00); a new value can now be entered.
9. When the Kitchen Timer is complete, a beep will sound.
10. It is possible to add extra time by pressing the quickset pad
next to Add More Time or to cancel the function by pressing
the quickset pad next to Cancel Timer.
11. To add more time, use the number keypad.
12. Press START.
9