Upload Configuration File To Tftp Server; Save Log To Tftp Server - IBM BladeCenter Installation And User Manual

Enter the IP address of the TFTP server and specify the path and file name of the
switch configuration file on the TFTP server.
Highlight APPLY and press Enter to record the IP address of the TFTP server.
Select Save Changes in the main menu to enter the address into NVRAM.
Highlight START and press Enter to initiate the file transfer.

Upload Configuration File to TFTP Server

To upload a configuration file to the TFTP server, highlight Upload Configuration
File to TFTP Server on the Switch Utilities menu and press Enter.
Enter the IP address of the TFTP server and the path and specify the path and file
name of the switch configuration file on the TFTP server and press APPLY.
Highlight START and press Enter to initiate the file transfer.

Save Log to TFTP Server

To save a history log on a TFTP server, highlight Save Log File to TFTP Server on
the Switch Utilities menu and press Enter.
91
Chapter 6. Configuring the switch module through the Telnet interface