Table of Contents
Advertisement
Speed control cannot reduce the vehicle speed if it increases above the
set speed going downhill. If your vehicle speed is faster than the set
speed while driving downhill, you may want to shift to the next lower
gear or apply the brakes to reduce your vehicle speed.
If your vehicle slows down more than 16 km/h (10 mph) below your set
speed on an uphill, your speed control will disengage. This is normal.
Pressing RES will re-engage it.
Do not use the speed control in heavy traffic or on roads that
are winding, slippery, or unpaved.
To set a higher set speed
• Press and hold SET +. Release
the control when the desired
vehicle speed is reached or
• Press and release SET + to
operate the Tap-Up function.
Each press will increase the set
speed by 1.6 km/h (1 mph) or
• Accelerate with your accelerator
pedal. When the desired vehicle
speed is reached, press and
release SET +.
You can accelerate with the accelerator pedal at any time during speed
control usage. Releasing the accelerator pedal will return your vehicle to
the previously programmed set speed.
To set a lower set speed
• Press and hold SET −. Release
the control when the desired
speed is reached or
• Press and release SET − to
operate the Tap-Down function.
Each press will decrease the set
speed by 1.6 km/h (1 mph) or
2003 Navigator (nav)
Owners Guide (post-2002-fmt)
USA English (fus)
Driver Controls
129
Advertisement
Table of Contents
