Configuring Features And Services - Cisco IP Communicator Administration Manual

Configuring Features and Services

After you add a Cisco IP Communicator device to Cisco CallManager, you can
use the Cisco CallManager Administration web application to configure
telephony features, modify phone templates, assign users, and set up services for
Cisco IP Communicator. You can also configure product-specific settings for
Cisco IP Communicator.
After you run the Cisco IP Communicator Administration Tool, you can use the
Directory Wizard to set up the Quick Search and Dialing Rules features to work
with directories that are located on the Cisco CallManager server.
In general, it is preferable to configure the settings in Cisco CallManager
Tip
Administration before deploying Cisco IP Communicator to ensure that features
are set up properly for the user at first launch and will remain consistent thereafter.
This chapter contains the following topics:
•
•
•
•
•
•
•
OL-4698-01
Telephony Features Available for Cisco IP Communicator, page 5-2
Configuring Corporate and Personal Directories, page 5-5
Modifying Phone Button Templates, page 5-15
Configuring Softkey Templates, page 5-15
Setting Up Services, page 5-16
Adding Users to Cisco CallManager, page 5-17
Disabling Local Settings Access, page 5-18
Cisco IP Communicator Administration Guide for Cisco CallManager
C H A P T E R
5
5-1