Recording Overdubs; Undoing/Redoing Overdubs - DigiTech JamMan Express XT Owner's Manual

Recording Overdubs

Once a phrase has been recorded, overdubs can be added on top of the phrase�
To record overdubs:
1� Press the
FOOTSWITCH
the phrase will begin playing�
2� Press the
FOOTSWITCH
yellow and audio will be recorded on top of the phrase�
3� When done overdub recording, press the
session� The loop will continue playing along with the newly recorded overdub�
4� You can now decide whether you would like to undo the last overdub and re-record
it (see "Undoing/Redoing Overdubs" in the following section) or proceed and record
additional overdubs by repeating steps 2-3�
5� Press the
FOOTSWITCH

Undoing/Redoing Overdubs

When recording overdubs, you can choose to undo the last overdub recorded if you wish
to re-record it� If you change your mind or accidentally undo an overdub, you can then redo
the overdub to retrieve it�
To undo/redo an overdub:
1� Record an overdub as described in the previous section, "Recording Overdubs"�
2� Ensure the loop is playing (the
the
FOOTSWITCH
and hold the
FOOTSWITCH
indicating the overdub has been undone�
3� If you wish to restore the overdub, press and hold the
seconds to redo the overdub� The
overdub has been redone�
NOTE: Each time an overdub is added, the last overdub is merged with the original loop
and can no longer be undone using the Undo feature� If the combined loop and overdub
length exceed 10 minutes (e�g�, a 6 minute loop and 6 minute overdub, etc�), the two
will automatically be merged and the overdub cannot be undone� Overdubs added to a
recorded loop of 5 minutes or less will not be automatically merged�
to start loop playback� The
again to begin overdub recording� The
2 times quickly to stop loop playback�
PLAY LED
1 time to initiate loop playback� Once the loop is playing, press
for ~2 seconds� The
DUB LED
PLAY LED
to end the overdub recording
FOOTSWITCH
should be on)� If the loop is not playing, press
will quickly flash yellow,
DUB LED
FOOTSWITCH
will quickly flash yellow, indicating the
will light solid green and
will light solid
DUB LED
again for ~2
7