Ez Setup Wizard - NETGEAR N150R User Manual

EZ Setup Wizard

You can log in to the router and use EZ Setup to set up your Internet connection.

To use the setup wizard:
From the top of the router menu, select EZ Setup to display the following screen:
1.
Select either Yes or No, I want to configure the Router myself. If you select No, proceed
2.
to
Internet Setup (Basic Settings)
If you selected Yes, click Next.
3.
With automatic Internet detection, the EZ Setup Wizard searches your Internet
connection for servers and protocols to determine your ISP configuration.
The EZ Setup Wizard cannot detect a Point-to-Point Tunneling
Note:
Protocol (PPTP) connection. If your ISP uses PPTP, you have to set
your Internet connection through the screen described in
Setup (Basic Settings)

To troubleshoot an unsuccessful Internet connection:
Review your settings to be sure that you have selected the correct options and typed
1.
everything correctly.
Contact your ISP to verify that you have the correct configuration information.
2.
Read
3. Chapter 7,
Technical Support.
If you cannot connect to the router, check the Internet Protocol (TCP/IP) properties in the
4.
Network Connections section of your PC Control Panel. They should be set to obtain both
IP and DNS server addresses automatically. See your computer documentation.
N150 WiFi Router (N150R)
on page 20.
on page 20.
Troubleshooting. If problems persist, register your product and contact
Getting Started
16
Internet