Lan Ports - NETGEAR N150R User Manual

LAN Ports

The LAN Ports screen allows configuration of LAN IP services such as Dynamic Host
Configuration Protocol (DHCP) and Routing Information Protocol (RIP).
The router is shipped preconfigured to use private IP addresses on the LAN side and to act
as a DHCP server. The router's default LAN IP configuration is:
LAN IP address. 192.168.1.1
•
Subnet mask. 255.255.255.0
•
These addresses are part of the designated private address range for use in private
networks and are suitable for most applications. If your network requires a different IP
addressing scheme, you can change these settings in the LAN Setup screen.

To change the LAN settings:
If you change the LAN IP address of the router while connected
Note:
through the browser, you will be disconnected. You will have to open
a new connection to the new IP address and log in again.
Select Setup > LAN Ports to display the following screen:
1.
Enter the settings that you want to customize. These settings are described in the following
2.
section,
LAN TCP/IP
Click Apply to save your changes.
3.
LAN TCP/IP Setup
IP Address. The LAN IP address of the router.
•
N150 WiFi Router (N150R)
Setup.
Router Setup
29