Back Panel - NETGEAR N150R User Manual

Table 1. Front panel LED descriptions
LED Description
Power/
• Solid green.Power is supplied to the router.
Check
• Blinking green. The router is starting up.
• Off. Power is not supplied to the router.
Wireless
• Blinking green. Data is being transmitted or received over the wireless link.
• Off. The wireless radio is turned off.
Internet
• Solid green. The Internet connection has been established.
• Blinking green. There is traffic on the Internet port.
• Off. No Internet connection.
Ethernet
• Solid green. The LAN port has detected an Ethernet link with a device such as a computer.
(1, 2)
• Blinking green. Data is being transmitted or received.
• Off. No link is detected on this port.

Back Panel

The back panel has the connections shown in the following figure.
Figure 3. Router, rear view
See
Default Factory Settings
N150 WiFi Router (N150R)
Ethernet
LAN ports (2)
Internet port
Reset button
Power On/Off
Power connector
on page 83 for information about restoring factory settings.
Hardware Setup
9