Advanced Wifi Settings - NETGEAR N150R User Manual

Advanced WiFi Settings

Select Advanced > WiFi Settings to display the following screen:
The following settings are available in this screen:
Enable Wireless Router Radio. You can completely turn off the wireless portion of the
wireless router by clearing this check box. Select this check box again to enable the wireless
portion of the router. When the wireless radio is disabled, other members of your household
can use the router by connecting their computers to the router with an Ethernet cable.
The Fragmentation Length, CTS/RTS Threshold, and Preamble
Note:
Mode options are reserved for wireless testing and advanced
configuration only. Do not change these settings.
Turn off wireless signal by schedule. You can use this feature to turn off the wireless
signal from your router at times when you do not need a wireless connection. For instance,
you could turn it off for the weekend if you leave town.
WPS Settings. You can use these settings to disable or enable the WPS PIN and the Keep
Existing Wireless Settings check box. Both of these are enabled by default. If you clear the
Keep Existing Wireless Settings check box, when someone uses a WPS button to join the
wireless network, the SSID changes.
Wireless Card Access List. Click the Set Up Access List button display the Wireless Card
Access List screen. You can restrict access to your network to specific devices based on
their MAC address.
N150 WiFi Router (N150R)
Advanced Settings
62