Global
Controllers
JS Lock
You can switch the joystick between Lock and Unlock states
(the LED will light when the joystick is locked).
If you turn the Lock function on while using the joystick, the
effect will be locked at that controller position.
This parameter specifies the range where the joystick effect
will be locked. The effect will be locked only within the
range you specify. JS X Lock allows you to lock the effect
within the full range of the X‐axis, JS Y Lock within the full
range of the Y‐axis, JS +Y Lock within the +Y axis, JS ‐Y Lock
within the ‐Y axis, and JS X&Y Lock within the full ranges of
the X‐axis and Y‐axis.
X
Y
For example if you choose JS+Y Lock, and then move the
joystick away from yourself and turn Lock on, the joystick
(+Y) operation will be locked (held) at that position; modu‐
lation will continue to be applied even when you return the
joystick to its original position. You can then move the joy‐
stick in the ‐Y direction to apply both types of modulation
simultaneously.
If you lock the joystick, MIDI transmission of the corre‐
sponding controller will stop, but reception will still occur.
Foot Switch & Pedal / Damper (PEDAL SW 1)
Type
This specifies the type of the switch or pedal that is con‐
nected to the DAMPER/PEDAL/SW1 jack.
Damper: Choose this if a half‐damper pedal is connected.
Switch: Choose this if a pedal switch is connected.
Pedal: Choose this if a volume pedal is connected.
Foot Switch function [List of Foot Switch Assign]
This is shown if "Type" is set to Switch.
For more information, please see "List of Foot Switch
assignments" on page 128.
Foot Pedal function
This is shown if "Type" is set to Switch. Specify the function
that will be controlled by the pedal switch (PS‐1, sold sepa‐
rately) connected to the DAMPER/PEDAL/SW1 jack.
( "List of Foot Switch assignments" on page 128)
Damper/Switch Polarity [(–) KORG Standard, (+)]
Set this to match the polarity of the damper pedal or pedal
switch thatʹs connected to the DAMPER/PEDAL/SW1 jack.
If youʹve connected a Korg damper pedal (separately sold
DS‐1H) or a Korg pedal switch (separately sold PS‐1),
choose the ‐Korg setting, since these products use a ‐ (↓)
polarity. If youʹve connected a damper pedal or pedal
switch that uses a + (↑) polarity, choose the "+" setting (↓:
open type, ↑: closed type). If this polarity setting is incor‐
rect, using the damper pedal or pedal switch will not pro‐
duce the correct result. If you have not connected a damper
pedal or pedal switch, leave this set to (‐).
74
[X, Y, +Y, -Y, XY]
+Y
-Y
XY
[Damper, Switch, Pedal]
[List of Foot Pedal Assign]
Foot Switch & Pedal (PEDAL SW 2)
Type
Specify the switch or pedal that is connected to the PEDAL/
SW2 jack.
Switch: Choose this if a pedal switch is connected.
Pedal: Choose this if a volume pedal is connected.
Foot SW function
[List of Foot Switch Assign]
This is shown if "Type" is set to Switch.
For more information, please see "List of Foot Switch
assignments" on page 128.
Foot Pedal function
This is shown if "Type" is set to Switch. Specify the function
that will be controlled by the pedal switch (PS‐1, sold sepa‐
rately) connected to the PEDAL/SW2 jack.
( "List of Foot Switch assignments" on page 128)
Damper/Switch Polarity [(–) KORG Standard, (+)]
Set this to match the polarity of the damper pedal or pedal
switch thatʹs connected to the PEDAL/SW2 jack.
If youʹve connected a Korg damper pedal (separately sold
DS‐1H) or a Korg pedal switch (separately sold PS‐1),
choose the ‐Korg setting, since these products use a ‐ (↓)
polarity. If youʹve connected a damper pedal or pedal
switch that uses a + (↑) polarity, choose the "+" setting (↓:
open type, ↑: closed type). If this polarity setting is incor‐
rect, using the damper pedal or pedal switch will not pro‐
duce the correct result. If you have not connected a damper
pedal or pedal switch, leave this set to (‐).
[Switch, Pedal]
[List of Foot Pedal Assign]