Korg PS60 Parameter Manual page 147

AMS : Alternate Modulation Source
FX Dmod Src : Effect Dynamic Modulation Source
n : MIDI Channel No. (0 - 15) •••••• Usually Global Channel.
When in Performance, each timbre's channel.(Status is INT)
g : Always Global Channel No. (0 - 15)
x : Random
ENA T : Enabled when Enable After Touch in Global mode is on.
A,C,P : Same as Transmitted data
*1 : MIDI In [Hex]
pp = 00 - 13
*2 : When in Program, Global channel.
When in Performance, each Timbres channel.
*3 : r = 0 : Pitch Bend Sensitivity ( Bend Range )
= 1 : Fine Tune ( Detune )
= 2 : Coarse Tune ( Transpose )
Data Entry LSB value has no effect for Pitch Bend Sensitivity and Coarse Tune.
2 2 -2 SYSTEM REALTIME MESSAGES
|Status[Hex] | Description ( Use for..... )
| F8 | Timing Clock ( Tempo, AMS & FX Dmod Src )
| FE | Active Sensing ( MIDI Connect check )
*5 Receive when MIDI Clock in Global mode is External MIDI.
2 2 -3 SYSTEM EXCLUSIVE
2-3-1 UNIVERSAL SYSTEM EXCLUSIVE MESSAGE ( NON REALTIME )
DEVICE INQUIRY ( When received this message, transmits INQUIRY MESSAGE REPLY )
[ F0,7E,nn,06,01,F7 ] 3rd byte nn : Channel = 0 - F : Global Channel
2-3-2 UNIVERSAL SYSTEM EXCLUSIVE MESSAGES ( REALTIME )
Master Volume
[ F0,7F,0g,04,01,vv,mm,F7 ] 3rd byte
Master Balance
[ F0,7F,0g,04,02,vv,mm,F7 ] 3rd byte
Master Fine Tune ( Control Master Tune(cent) in Global )
[ F0,7F,0g,04,03,vv,mm,F7 ] 3rd byte
Master Coarse Tune ( Control Transpose (chromatic step) in Global )
[ F0,7F,0g,04,04,vv,mm,F7 ] 3rd byte g : Global Channel
Performance
: 000 - 019
= 7F
g : Global Channel
6th byte vv : Value(LSB)
7th byte mm : Value(MSB)
mm,vv = 00,00 - 7F,7F : Min - Max
g : Global Channel
6th byte vv : Value(LSB)
7th byte mm : Value(MSB)
mm,vv = 00,00:Left, 40,00:Center, 7F,7F:Right
g : Global Channel
6th byte vv : Value(LSB)
7th byte mm : Value(MSB)
mm,vv = 20,00:-50, 40,00:+00, 60,00:+50
6th byte vv : Value(LSB)
7th byte mm : Value(MSB)
mm,vv = 34,00:-12, 40,00:+00, 4C,00:+12
|
*5|
|
: Any Channel
MIDI Implementation
143