OPERATION
OPERATION
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects
away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts
have come to a completestop before removing obstructions, clearing debris, or servicing unit. Allow
unit to cool before performing service.
Note: Refer to your Pro Attachment Series or Split Boom Operator's Manuals for correct engine fueling,
starting and stopping instructions.
Adjusting Cutting Angle
Never adjust cutting assembly with engine running.
Hedge Clipper blades are sharp. Always wear gloves when adjusting cutting assembly, otherwise
serious injury may result.
DO NOT stand hedge clipper on end when adjusting cutting
angle, otherwise serious injury may result.
1. Place unit on a flat clear area. Assure stop switch is in the
"STOP" position.
2. Pull out indexing ring (A), and turn ¼ turn to lockout
position.
3. Turn hedge clipper ¼ turn so that indexing ring faces
downward.
4. Release hand-guard blade lock (B) with right hand, while
holding blade-adjustment handle (C) with left hand.
12
99944200595
A
B
X7532095606
© 08/2013 ECHO Inc.