Setting Up The Iscsi Initiator For Apple Mac Os X - HP MPX200 User Manual

Setting up the iSCSI initiator for Apple Mac OS X

1. Install the Xtend SAN iSCSI Initiator 3.10.
2. Run the Xtend SAN iSCSI application to discover and configure the P6000 EVA iSCSI targets.
The Xtend SAN iSCSI Initiator can discover targets either by static address or iSNS.
For static address discovery:
a. Click Discover Targets, and then click Discover by DNS/IP
Figure 63 Discover targets
b. Enter the static IP address of the mpx iSCSI port in the Address box, and then click Finish
(Figure 64 (page
Figure 64 Add static IP address
70 MPX200 iSCSI configuration rules and guidelines
70)).
(Figure 63 (page 70)).