Locating The Mpx200 - HP MPX200 User Manual

2. Click Set Options.
3. Click Save Configuration.
4. Select a configuration method, and then click Select (see
Figure 27 iSCSI controller configuration selection

Locating the MPX200

A flashing blue LED in the center of the blade indicates that the locating beacon is on.
NOTE: The beacon turns off after 15 minutes.
Figure 28 Blue LED locating beacon
1. Input fault LED
3. Heartbeat LED
5. 1–GbE iSCSI ports
7. 8–Gb/s FC ports
9. RS-232 port
To enable or disable the locating beacon:
1. Select the iSCSI controller.
2. Click Locate.
3. Click Locate ON or Locate OFF, and then click OK
38 Managing MPX200 iSCSI using HP P6000 Command View
Figure 27 (page
2. System power LED
4. 1-GbE or 10-GbE iSCSI ports
6. Maintenance button
8. UID beacon (blue LED)
10. Management port 10/100/1000 Ethernet
(Figure 29 (page
38)).
39)).