Security/Password Menu; Resetting Passwords; Integrated Lights Out 2 Management Processor - HP Integrity BL860c User's & Service Manual

Reset Configuration to Default lets you restore server settings to their original configuration
Help displays additional information about the available options
Exit returns to the EFI startup menu

Security/Password Menu

You can set administrator and user passwords to provide different levels of access to the system
firmware:

Resetting Passwords

If you forget your passwords, they can be reset using an iLO 2 MP command.
Run the MP BP command to reset the iLO 2 MP and reset the password.
NOTE:

Integrated Lights Out 2 Management Processor

The integrated Lights Out Management Processor (iLO 2 MP) is an independent support system for
the server. It provides a way for you to connect to a server and perform administration or monitoring
tasks for the server hardware.
The iLO 2 MP controls power, reset, Transfer of Control (ToC) capabilities, provides console access,
displays and records system events, and displays detailed information about the various internal
subsystems. The iLO 2 MP also provides a virtual front panel used to monitor server status and the
state of front panel LEDs. All iLO 2 MP functions are available through the LAN and the local
RS-232 port.
The iLO 2 MP is available whenever the server is connected to a power source, even if the server
main power switch is off.
Access to the iLO 2 MP can be restricted by user accounts. User accounts are password protected
and provide a specific level of access to the server and iLO 2 MP commands.
Multiple users can interact with the iLO 2 MP. From the MP Main Menu, users can select any of
the following options: enter iLO 2 MP command mode, enter console, view event logs, view console
history, display virtual front panel, enter console session, or connect to another iLO 2 MP. Multiple
users can select different options from the MP Main Menu at the same time. However, iLO 2 MP
command mode and console mode are mirrored, The iLO 2 MP allows only one user at a time to
have write access to the shared console.
For a complete explanation of configuring the iLO 2 MP and using the iLO 2 MP commands, see
the HP Integrity iLO 2 Operations Guide.
You can only run this command when directly connected to the server blade.
Integrated Lights Out 2 Management Processor 179