Booting And Shutting Down Hp-Ux; Adding Hp-Ux To The Boot Options List; Adding The Hp-Ux Boot Option - HP Integrity BL860c User's & Service Manual

Examples of autoboot commands for HP-UX:
Disable autoboot from the EFI Shell by issuing autoboot off
◦
Enable autoboot with the default timeout value by issuing autoboot on
◦
◦ Enable autoboot with a timeout of 60 seconds by issuing the autoboot time 60
◦ Set autoboot from HP-UX using setboot
◦ Enable autoboot from HP-UX using setboot -b on
Disable autoboot using setboot -b off
◦
Examples of autoboot commands for Linux:
Disable autoboot from the EFI Shell by issuing autoboot off
Enable autoboot with the default timeout value by issuing autoboot on
Enable autoboot with a timeout of 60 seconds by issuing the autoboot 60
Disable the automatic retries during autoboot by issuing autoboot -nr 0
For more information on the autoboot command, enter help autoboot.

Booting and Shutting Down HP-UX

This section covers booting and shutting down HP-UX on the server blade.
To add an HP-UX entry to the boot options list, see
(page 70).
To boot HP-UX, use one of the following procedures:
To boot HP-UX normally, see
◦
HP-UX boots in multi-user mode.
To boot HP-UX in single-user more, see
◦
(page
To boot HP-UX in LVM-maintenance mode, see
◦
Mode" (page
To shut down the HP-UX operating system, see

Adding HP-UX to the Boot Options List

This section describes how to add an HP-UX entry to the system boot options list.
You can add the \EFI\HPUX\HPUX.EFI loader to the boot options list from the EFI Shell or EFI
Boot Configuration menu (or in some versions of EFI, the Boot Options Maintenance Menu).
NOTE: On HP Integrity servers, the operating system installer automatically adds an entry to the
boot options list.

Adding the HP-UX Boot Option

This procedure adds an HP-UX item to the boot options list from the EFI Shell.
NOTE: To add an HP-UX boot option when logged in to HP-UX, use the setboot command.
For details, see the setboot(1M) manpage.
70 Booting and Shutting Down the Operating System
"HP-UX Standard Boot" (page
73).
74).
"Adding HP-UX to the Boot Options List"
71).
"Booting HP-UX in Single-User Mode (EFI Shell)"
"Booting HP-UX in LVM-Maintenance
"Shutting Down HP-UX" (page 74).