Assembling Your Keyset - Samsung iDCS 28D User Manual

Idcs keyset system
Hide thumbs Also See for iDCS 28D:
Table of Contents

Advertisement

KEYSET DAUGHTER MODULES
[28 AND 18 BUTTON KEYSETS ONLY]
iDCS 28D and 18D button keysets can have one of three different types of
daughter module installed on them to enhance the operation of the keyset
or to provide an additional local port depending on the type of module.
iDCS KDB-DIGITAL LINE
INTERFACE (FKDBD)
If your keyset is connected to a Digital Line Interface (DLI) port that supports
2B+D operation (your installing company can determine this) you may
install a daughter module that provides a Digital Line Interface (DLI) port for
connection of a digital station device such as a keyset or 64 button module.
iDCS KDB-SINGLE LINE
INTERFACE (FKDBS)
If your keyset is connected to a Digital Line Interface (DLI) port that supports
2B+D operation (your installing company can determine this) you may
install a daughter module that provides a Single Line Interface (SLI) port for
connection of a standard telephone device such as a cordless phone.
iDCS KDB-FULL DUPLEX (FKDBF)
The standard speakerphone mode of operation for a iDCS keyset is "half
duplex". This means that you cannot transmit and receive speech at the
same time. Adding a FKDBF to your keyset will convert the speakerphone
into full duplex mode enhancing its operation. In addition the FKDBF may
have up to three (3) external microphones attached to it for conference room
type applications. These microphones require an "EXTMIC" key pro-
grammed on the keyset to activate or deactivate them.
10

ASSEMBLING YOUR KEYSET

Place the keyset face down on a flat surface.
Remove the base pedestal by placing your thumbs over the attachment
clips and press outward while simultaneously pressing down on the key-
set body with your fingertips.
Plug the handset cord into the jack marked with the
Route the handset cord out the RIGHT side of the keyset as you look at
it face down.
Reattach the base pedestal.
Plug the line cord into the jack on the base of the keyset marked with the
symbol and route it through one of the cable channels in the bottom
of the base pedestal.
symbol.
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Idcs 18dIdcs 8dIdcs 64bIdcs 14b

Table of Contents