HP ProLiant ML150 Quickspecs page 30

QuickSpecs
Memory
If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in channel 2, you still run at 1066MHz
If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the other channels,
you run at 1066MHz
If you install 3DPC in one channel (if applicable) and 1DPC in all other channels, you run at 800MHz
95 Watt CPU's are required for 1333MHz DIMM speeds
References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc.
Standard Memory
All HP ML150 G6 models ship with 12 DIMM sockets.
Factory Integrated Models include the memory capacity of your choice.
Basic memory slot and population diagram
Population order; start with "A" first, "B" second, "C" third, etc.
Chnl 1
Chnl 2
Chnl 3
Standard Memory (1 CPU model)
Hot Plug SAS/SATA performance and base models include 2 x 2 GB UDIMM and 1 x 2 GB UDIMM respectively
Non-Hot Plug SATA entry models include 1 x 2 GB UDIMM
4 GB (2 x 2GB) of PC3-10600 (DDR3-1066) Advanced ECC UDIMMs
Chnl 1
Chnl 2
Chnl 3
12 DIMM SLOTS (6 per CPU node)
CPU1
slot # population order
1 D
2 A
3 E
4 B
5 F
6 C
CPU1
slot # population order
1 D: empty
2 A: 2GB DIMM
3 E: empty
4 B: 2GB DIMM
5 F: empty
6 C: empty
DA - 13249 North America — Version 33 — September 24, 2012
HP ProLiant ML150 Generation 6 (G6)
CPU2
slot # population order
1 D
2 A
3 E
4 B
5 F
6 C
CPU2
slot # population order
1 D: empty
2 A: empty
3 E: empty
4 B: empty
5 F: empty
6 C: empty
Chnl 1
Chnl 2
Chnl 3
Chnl 1
Chnl 2
Chnl 3
Page 30