HP ProLiant ML150 Quickspecs page 36

QuickSpecs
Storage
NOTE: To support 8 drives, the purchase of the optional 2nd hot plug drive cage, 750W Redundant Power Supply, Redundant Power
Supply Enablement Kit and HP Smart Array P410 Controller (if not already part of the configuration) are required.
Maximum Storage Capacity - SAS Models
Internal
Total
Maximum Storage Capacity - SATA Models
Internal
Total
Tape and Disk-Based Backup
NOTE: For the complete range of tape drives, autoloaders, libraries and media, including the internal fitting models, see:
http://www.hp.com/go/tape. For the complete range of D2D Backup Systems see: http://www.hp.com/go/d2d. For the complete
range of RDX drives and media see: http://www.hp.com/go/rdx. For hardware and software compatibility of HP disk and tape backup
products see: http://www.hp.com/storage/SPOCK
HP SCSI Tape Drives
LTO-1 Ultrium 232
LTO-2 Ultrium 448
LTO-3 Ultrium 920
LTO-3 Ultrium 960
LTO4 Ultrium 1760
LTO-4 Ultrium 1840
DAT 40
DAT 72
DAT 160
HP SCSI Rack Mount Kits
1U Rack-Mount Kit
3U Rack-Mount Kit
HP USB Tape Drives
DAT 40
DAT 72
DAT 160
DAT 320
HP USB Rack Mount Kits
1U USB Rack-Mount Kit
HP SAS Tape Drives
DAT 160
DAT 320
LTO-2 Ultrium 448
LTO-3 Ultrium 920
LTO-4 Ultrium 1760
24.0TB (8 x 3TB SAS hard drives)
24.0TB (8 x 3TB SAS hard drives)
24.0TB (8 x 3TB SATA drives)
24.0TB (8 x 3TB SATA drives)
Position Recommended Controller
Internal or HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus Adapter
External
External HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus Adapter
Internal or USB 2.0 Port
External
External USB 2.0 Port
Internal or HP Smart Array P212/ZM 1-ports Int/1-ports Ext PCIe x8 SAS
External Controller
DA - 13249 North America — Version 33 — September 24, 2012
HP ProLiant ML150 Generation 6 (G6)
Part Number
412911-B21
412911-B21
N/A
N/A
462828-B21
Page 36