HP ProLiant ML150 Quickspecs page 19

QuickSpecs
Configuration Information - Factory Integrated Models
HP Power Supplies
Step 3: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Core Options" and "Additional Options" sections below.
HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus Adapter
NOTE: Recommended HBA for SCSI tape drive connection.
Power Supplies
HP 460W Factory Integrated Power Supply Kit
HP 750W Common Slot Gold Hot Plug Power Supply Kit
NOTE: 750W RPS requires one (1) RPS Enablement Kit 5U G6 (P/N 508544-B21).
NOTE: Two (2) 750W PSUs and one (1) RPS enablement kit are required to achieve
redundancy.
NOTE: The 2nd hot plug hard disk drive cage requires the purchase of 750W Redundant
Power Supply, Redundant Power Supply Enablement Kit and HP Smart Array P410
Controller (if not already part of the configuration).
Power Options
HP 5U G6 Redundant Power Supply Enablement Kit
DA - 13249 North America — Version 33 — September 24, 2012
HP ProLiant ML150 Generation 6 (G6)
412911-B21
500447-B21
512327-B21
508544-B21
Page 19