Selecting Watch Points - Bosch D220 User Manual

Selecting Watch Points

Once you decide how your system responds to watched points (see
Selecting Watch Tone on page 19), you need to decide which points in
your system are to be watched. Use this feature to tell your system which
points to watch. You cannot watch fire points.
Choosing which points to watch depends upon your goals. If you have
small children, you may choose to watch points of entry and exit. Each
time a watch point is faulted (door or window is opened) the keypad
responds as programmed. For example, you can tell your system to
produce a short beep when a watch point is faulted (see Selecting Watch
Tone on page 19).
1. Make sure that your system is off (On light is off).
2. Press the [8] key. The display shows all of the points that are
currently being watched. In this example, points 2, 3, and 4 are
currently watched points:
3. To select or deselect watched points, you must enter your
passcode (Owner type required) after pressing the [8] key (Step
2).
4. You may select and deselect watch points by pressing keys. Key
[1] for point 1 and so on. To select or deselect all points, press
[9].
5. For instance, you could press keys [5], [6], [7], and [8], making
them watch points. The display would show:
6. You may continue to select or deselect as many watch points as
are available. When you are finished, press the [CLEAR] key to
return to the off display.
20