Change Passcode Type - Bosch D220 User Manual

Change Passcode Type

I have this feature.
I do not have this feature.
This feature allows those with Owner type passcodes to change the
passcode type for each of the users in the system. You cannot change
your own passcode type.
Passcodes can be one of three types: Owner, User, or One-Time.
• Owner: Re-configure how the system responds to "watched"
points. In addition, the Owner passcode can be used to change
other users' type and passcodes.
• User: Given to most users of the system, and allow all but owner
functions to be performed.
• One-Time: Disarm the system one time only. You can give them
to temporary users, such as housekeepers or service workers.
1. Make sure that the system is turned off.
2. Press the [6] key. The point lights (1 through 8) come on,
showing the current passcode type for users 1 through 8.
3. Enter your passcode. (Owner Type required).
4. Press keys [1] through [8] to toggle passcode types. Key 1 for
User one and so on. For example, if light 3 is blinking (User
Type), pressing key [3] changes the passcode type for User three
to One Time. Light 3 changes from blink to on.
Pressing [3] again toggles the passcode to the Disabled Type, as
indicated by the light, which turns off. Pressing [3] a third time
changes the passcode to the Owner type, as indicated by the fast
blinking light. To remove a passcode, change its type to disabled.
5. When you are finished, press [CLEAR] to return to the off
display.
27