10 - Routing And Scene Libraries; Routing Libraries; Saving The Current Routing Settings To The Library91 - Tascam 788 Owner's Manual

10 – Routing and scene libraries
The 788 allows you to store and recall commonly-
used assignment (routing) patterns as well as scenes
which contain the settings for the mixer.
Up to 10 scene settings may be stored in a library
area for each song, which is automatically stored
when the song is saved.

Routing libraries

In the routing library, you store up to 128 patterns of
input assignments to library entries.
The assignments stored in the routing patterns
include:
• the assignments of the inputs to the mixer channels
(see "Assigning sources to mixer channels." on
page 36)
Saving the current routing settings to the library
You can save to the routing library while playback is
stopped, or while playing back or recording.
To store the current routing settings to a library entry:
1 Press the
QUICK SETUP
2 Use the dial to scroll down to the
entry in the list, and press
3 There are two tabs on the top of this display:
the tab allows you to read settings
from the library, and the
you to store the current settings to the library.
91
TASCAM 788 Digital PortaStudio
key.
:
ENTER
tab allows
Routing patterns are stored in a common library area,
available to all songs, and are automatically saved
when the 788 is powered down.
There is no need to perform a special operation to
save either type of library data.
• the inputs to the sub-mixer (see "Assigning inputs
to the sub-mixer" on page 37)
• the effect assignments (see "Setting up EFFECT 1"
on page 81 and "Setting up EFFECT 2" on
page 82).
NOTE
The assignments of virtual tracks to tracks are not stored
as part of a routing patterns. These assignments are
stored as part of a song.
If the tab is not highlighted, press the
Á key to highlight it.
4 Use the dial to scroll to the entry where you
want to store the current settings.
TIP
You can give a title to the highlighted entry at this point, fol-
lowing the instructions in "Entering and editing titles" on
page 26.
5 Press . The settings are saved and the
ENTER
display returns to the home screen.