Using The Footswitch; Mode Functions; Remote Control (Tascam Rc-10); Setting The Wired Remote Control - Tascam DR-40 Reference Manual

13 – Using the REMOTE jack

Using the footswitch

Press a pedal on the footswitch to operate the unit. The
function of each pedal corresponds to the assignment shown
on the screen.
REMOTE

Mode functions

The functions for each mode are as follows.
MODE
L
PLAY
REW
RECORD 1
STOP
R
ECORD 2 STOP
MINUTES
FLASH
104
TASCAM DR-40
FOOT SW
C R
PLAY/STOP FWD
REC/PAUSE INC
REC/PAUSE MARK
PLAY/STOP SPEED CHANGE

Remote control (TASCAM RC-10)

Setting the wired remote control

Make wired remote control settings on the
1 Press the MENU button to open the
2 Use the + and – buttons to select the
and press the ENTER/MARK or / button to open the
submenu.
OTHERS
3 Use the + and – buttons to select
ENTER/MARK or / button to open the
4 Use the + and – buttons to select
the ENTER/MARK or / button.
Wired remote
control
TASCAM RC-10
(sold separately)
screen.
REMOTE
screen.
MENU
menu,
OTHERS
, and press the
REMOTE
screen.
REMOTE
and press
CONTROLLER