Tascam 788 Owner's Manual page 23

2 – Getting started–Connecting other equipment to your 788
• If your external effects unit can only accept a mono
input, connect the
L AUX OUTPUT
the input.
• The MIDI connections described here do not have
to be direct connections—your sequencer will need
to accept data from the instrument chain and to
pass data to them. However, you should make sure
that MTC (MIDI Timecode) can be sent from the
788 to the sequencer, and MIDI Machine Control
AUDIO
OUTs
INPUTs A thru C
of the 788 to
MIDI
STEREO
INPUT D
OUTPUT
commands can be received by the 788 from the
sequencer, even if this means routing the MIDI sig-
nals through some MIDI THRU ports.
• If you are connecting an electric guitar (or bass
guitar) directly into the 788, use
the switch to —this allows the matching of
GUITAR
the input impedance to the high impedance of an
electric guitar.
REC IN
PLAY
OUT
TAPE IN
MONITOR
OUTPUT
AUX OUTPUT
AUX INPUTS
TASCAM 788 Digital PortaStudio
and set
INPUT D
23