Installing The Guest Laptop Shelf - Smart Technologies SMART Board 3000i Installation Manual

Installing the Guest Laptop Shelf

TIP
You can install the shelf
on either side of the
cabinet. If you're
installing the shelf on the
computer side of the
cabinet, install the shelf
before the computer. The
plastic hole covers are
much easier to remove
when the computer is not
inside.
1 Locate the two laptop shelf keyholes and the single thumbscrew hole on the upper right
(or left) side of the cabinet. Remove the plastic hole covers.
2 Push the two protruding bolts on the edge of the shelf into the two keyholes, and then
push the shelf firmly down.
3 Push the captive thumbscrew at the bottom of the shelf into the thumbscrew hole and tighten.
10
3000i Installation Guide
Guest Laptop Shelf
2 Keyholes
Thumbscrew Hole