Software Specifications - Canon LBP3360 User Manual

Software Specifications
Command language
Built-in fonts
Printable area
PCL5e, PCL6, UFR II
PCL: 45 Scalable fonts, 10 Bitmap fonts
PCL5e, PCL6
The printable areas are as follows.
A
Paper Size A: Left Edge B: Right Edge
A4 6.1
B5 7.4
A5 7.0
Legal 6.4
Letter 6.4
Executive 7.4
Statement 6.4
16K 6.4
Custom Size 6.4
Index Card 10.0 10.0
Envelope 10.0 10.0
UFR II
Data cannot be printed within a 5 mm margin on the top and
bottom sides and 4 mm margin on the right and left sides of the
paper. (For envelopes, 10 mm margin on all sides)
* If you have selected the [Print with Upper Left of Sheet as
Starting Point] check box in the [Finishing Details] dialog box
in UFR II Printer Driver, you can extend the printable area to
near the edges of the paper. However, the data may be printed
with the edges missing when a document with no margins is
printed, even if the [Print with Upper Left of Sheet as Starting
Point] check box is selected. In this case, specify the scaling
factor in UFR II Printer Driver to print smaller so that any data
on the document will not miss, and then print again.
B
C
D
C: Top Edge D: Bottom Edge
6.1 5.0 5.0
7.4 5.0 5.0
7.0 5.0 5.0
6.4 5.0 5.0
6.4 5.0 5.0
7.4 5.0 5.0
6.4 5.0 5.0
6.4 5.0 5.0
6.4 5.0 5.0
10.0 10.0
10.0 10.0
Specifications
(Unit: mm)
10
10-33