Specifying The Size Of The Paper In The Manual Feed Slot - Canon LBP3360 User Manual

Next, specify the paper size for the manual feed slot (See p. 4-46).

Specifying the Size of the Paper in the Manual Feed Slot

When you loaded paper in the manual feed slot, specify the paper size for the
manual feed slot using the control panel. When using paper or envelopes of
4
standard size, specify its size. When loading custom size paper, specify CUSTOM
SIZE or CUSTOM SIZER. The paper size setting for the manual feed slot is set to
"A4" by default.
Specify the paper size setting for the manual feed slot using the following
procedure.
IMPORTANT
Match the paper size specified in the SETUP menu of the printer and that specified in the
•
printer driver. If they do not match, the message <PC LOAD "size"> appears. In this
case, the setting value for SLOT PAPER SIZE is changed to that in the printer driver by
pressing the
When custom size paper is loaded, specify the setting for SLOT PAPER SIZE as follows.
•
- When the paper is loaded in landscape orientation: CUSTOM SIZE
- When the paper is loaded in portrait orientation: CUSTOM SIZER
When you change the paper loaded in the manual feed slot frequently, it is convenient if
•
SLOT PAPER SIZE is set to MIXED SIZES. If SLOT PAPER SIZE is set to MIXED
SIZES, you do not need to specify the setting for SLOT PAPER SIZE each time you load
the different size paper. However, observe the following when specifying MIXED SIZES.
- Make sure that the size of the paper loaded in the manual feed slot matches the paper
- When printing from UFR II Printer Driver, you can load paper either in portrait or
4-46 Printing from the Manual Feed Slot
CAUTION
When loading paper, take care not to cut your hands with the edges of the
paper.
IMPORTANT
Load the envelope so that it is straight.
(Online) key, allowing you to continue printing.
size specified in the printer driver before printing. If they do not match, the printer may
stop printing, displaying the message <41 CHK PAPER SZE>, or a paper jam may
occur. Be sure to check if the paper size specified in the printer driver matches the size
of the paper loaded in the manual feed slot before using the printer. However, if
SPECIAL MODE J is set to ON, the printer prints without checking the paper size even
when the paper size specified in the printer driver and the size of the paper loaded in
the manual feed slot do not match. For more details, see "SPECIAL MODE J," on p.
6-31.
landscape orientation. However, when printing custom size paper of its long edges
215.9 mm or less, load the paper in landscape orientation. When you are not using
UFR II Printer Driver, load the paper in portrait orientation.